
We produce a range of hi-tech models of different length for professional BX-racing.
The boards have a modern construction:
— sandwich construction,
— the light rocker of nose and tail,
— multi-radius sidecut,
— wrapped edge.
The best hard technologies in soft boot geometry.
| Lenght | Radius | Contact | Nose | Waist | Tail | Setback | Stance |
|---|---|---|---|---|---|---|---|
| 154 BX | 7-12 m | 138 cm | 29.5 cm | 24.5 cm | 27.8 cm | 3.7 cm | 48-56 cm |
| 158 BX | 8-13 m | 142 cm | 29.5 cm | 24.5 cm | 27.8 cm | 3.7 cm | 48-56 cm |
| 162 BX | 9-14 m | 146 cm | 29.5 cm | 24.5 cm | 27.7 cm | 5.8 cm | 50-58 cm |
| 162 BX Wide | 9 -14 m | 146 cm | 30.5 cm | 25.6 cm | 28.9 cm | 5.8 cm | 50-58 cm |
| 165 BX | 10-15 m | 149 cm | 29.5 cm | 24.5 cm | 27.7 cm | 6.8 cm | 51-59 cm |
| 165 BX Wide | 10 -15 m | 149 cm | 31.5 cm | 26.6 cm | 29.9 cm | 6.8 cm | 51-59 cm |
Kevlar
Kevlar-carbon sandwich construction provides amazing grip and stability in turns and low vibration levels.
World Cup
The Titanal construction is improved with two new technologies: Phenol Sidewalls and Tail Reinforcement by Vectran and Kevlar. This makes snowboards of the World Cup line even more suited to the demands of the racecourse. Except wide.
Stiffness
All the boards have three basic levels of stiffness: S (Soft), M (Medium), H (Hard).
Edge
The standard BX tune edge angle is 0° base and –2° (88°) from the side.
Base
NCB (Nano Carbon Base) for choice.
N — NCB (Nano Carbon Base). The base is universal, but preferably for cold temperature.
Super-fast specialized racing bases W, F, M (+50 €) with a high content of graphite having glide significantly higher, than usual sintered graphite base (for 162 BX Wide and 165 BX Wide only NCB).
W — IS NHS race 7520. Special racing base for warm and damp weather conditions (-4 °C & warmer, >80% humidity).
F — IS NHS race 7825. A special racing base is for cold and dry weather (-12 °C & colder, <50%).
M — IS NHS race 7816. Special running base is for medium temperature (-4 °C to –12 °C, 50 – 80% humidity).
Inserts
Inserts can be made according to the customer’s own measurements in case the order is not less than 24 same snowboards.
The customary snowboard topsheet is white with OES logo
Colored sliding base for the topsheet — 50 € (except for fiberglass models)
For all snowboards up to 310 mm wide:
For all snowboards up to 320 mm wide:
Adapted design from our library — 50 €
It is possible to print your own picture.


















































